Showing posts with label 308. Show all posts
Showing posts with label 308. Show all posts
Monday, February 24, 2014
Red Peugeot 308 GTi 2010
Red Peugeot 308 GTi
The Peugeot 308 GTi come with the same 1.6 litre THP 147 kW (200 PS) engine that will be featured in the RCZ coupe model. That engine makes the 308 GTI competitive with the 155 kW (211 PS) of the Golf GTI - the benchmark GTI for this segment.
The THP engine, fitted with a twin-Scroll turbocharger and a high pressure direct-injection system with VTi technology (variable valve and timing injection), produces 275 Nm (203 lb-ft) of torque and will come mated to a 6-speed manual gearbox. The 0 to 100 km/h sprint takes 7.7 seconds while fuel consumption will be 6.9 liters/100 km and CO2 emissions 159 g/km.
A sound system technology has also been employed to make sure the engine rumble provides for just the right sporty sound that customers will be looking for.
For the proper GTi ride the 308s front MacPherson suspension gets larger bearings with specific damper settings for the 22 mm rods (20 mm in the standard car). The rear torsion beam suspension also gets the same damper treatment.
On the outside are 18-inch wheels with 225/40 R18 tires, a rear spoiler, a lowered rear bumper fitted to a black (Perla Nera) diffuser and dual chrome exhaust pipes. The front fascia also gets a lowering panel borrowed from the 308 CC and a carbon-style insert beneath the front bumper.
GTi-badges are featured on the side and rear of the car.
On the interior are an aluminum foot rest and gear knob and a leather sport steering wheel.
Tuesday, December 10, 2013
Changing Spark Plug on Peugeot 308
How do you change a spark, in terms of difficulty - if you got the right tools it is easy. First off, a round of inspection on the engine block:

To remove the spark, we got to remove coil packs, first off .. lifting the connector and disconnect the cable by pulling it out.

Twist the coil pack clockwise and anticlockwise to loosen it and pull it out. Remember that this step must be done when engine is completely cold else you wont be able to pull it out due to the heat expansion.
Unload coil packs, doing 1 at a time.

Inspect the coil packs.. if it is severely oxidized at the connector to the spark .. it is time to change the coil packs.
You need this tools to unlock the sparks, to the right is the OEM bi-hex 14mm required to remove the oem plugs. On the left is the 16mm hex tool for the iridium sparks plus some other ratchet kit i got to get it done. The extensions are required in order to reach the plugs installed inside the engine.
Now just fix the spark socket to the ratchet and reach for the plugs. Turn counterclockwise to remove ..until it is loose, then slowly lift up the spark using the socket. There is a catch within the spark socket, so make sure it is correctly seating on the spark before removing else you will drop the plug. If you drop it, you may need to check the gap again. As now we have direct access to the engine chamber .. it will be wise not to drop anything inside the engine else you will earn a visit to the SC with the toll truck.
The next step is just use the hex spark socket, ensure that it it seating properly holding the plug, slowly insert in and tighten until snug. Rules of thumb is to tighten using hand lightly until snug, then tighten for another 1/4 turn. DO NOT OVER-TIGHTEN ELSE YOU RISK DAMAGING THE THREAD. Our EP6DT is a aluminum block, be gentle with it.
Does it matter .. hell yeah .. after new plugs and smaller gap .. i did not had any misfiring so far ..
so keeping the gap and sparks clean does help.
Got out the old plugs to clean and regap as well. It is as easy as light tapping the ground on concrete ...
| Cleaned plugs and regap - NGK Platinum OEM for the Pug |
Saturday, December 7, 2013
Rockstone F105 on Peugeot 308
![]() |
| Rockstone F105 |
Being typical on perspective we usually had with historical experience .. we tend to assume when it comes to branding .. and let move to china products ..
I for one would scorned when people get those china tyres .. Huh!! China tyres ... on the peugeot ... what the ...
Yup .. being out of option last minute before CNY .. i actually put on four on the pug ... and result .. it actually surprises me .. I was going for a soft and comfort tyre this round being as vehicle for wife and family i no longer need the performance edge ... actually Yoko DB was the preferred one.
Anyhow after intial run back to Kedah ..this tyre is soft and I manage to put it up to 170km/h - initial feel is that sidewall is soft hence more lean and less cornering abilities. But heck, it meets my initial objective .. a comfortable tyre. Reliability this is a question mark, only time will tell. But for now im happy - especially for the price i pay = RM280 per pc for 225/45/17 ... almost 1/2 price from a GY Assy 2!
The name sucks big time though .. they should be more creative though to come up with RockStone .. they should have name it Rolling Stone .... and its got the MOVES LIKE JAGGER!
* Just an update: i had driven for like 1/2 of the tyre lifespan ... so far there is no problems at all. Noise is still bearable .. in fact i think it does age better than Good Year in noise terms. Grip is still there .. would i change another .. yes in fact. Probably for my Gti also.

Thursday, November 21, 2013
Intake Valve Cleaning Flushing whatever on the Peugeot 308 STP Carb Spray
Old news as i done it once ... so it was the threebond however it is not so easily available off the counter so i opt to test out some of the stuff we can easily get ... and cheap. Im planning on doing this like once every 10k .. so it is gonna be cheap. Now i was looking for the seafoam but i think it is still not so easily available here at Penang and also might not be cheap also ..
So here is STP ... one reason i chose this is cos Ive been using the STP Son of a Gun .. and if you dont know what that is .. just goggle it out. It is one of the value for money all round interior juice up thing for me .. so one reason why I chose the STP carb cleaner ...
And it turns out - it was working like threebond did .. only 1/2 the price ... so Ill definitely firing this once every 10k as it is easy to get and cheap. It will smoke your garage like threebond did also ... woohooo
| PCV Hose Out - yeah . this time i got it right |
So here is STP ... one reason i chose this is cos Ive been using the STP Son of a Gun .. and if you dont know what that is .. just goggle it out. It is one of the value for money all round interior juice up thing for me .. so one reason why I chose the STP carb cleaner ...
And it turns out - it was working like threebond did .. only 1/2 the price ... so Ill definitely firing this once every 10k as it is easy to get and cheap. It will smoke your garage like threebond did also ... woohooo
![]() |
| STP carb spray into the PCV and works like the Threebond also ... |
Thursday, November 14, 2013
2012 Peugeot 308 CC

The new Peugeot 308 comes with a new look, features innovative e-HDi micro-hybrid technology and optimises fuel consumption and CO2 emissions, which start from just 98 g/km.
With its new lines, the Peugeot 308 subtly incorporates the Marques latest stylistic codes. The cars body follows the contours of the mechanical assembly underneath. The appeal of the three body shapes (Saloon, CC and SW) thus acquires a more technological elegance, illustrated by the presence of LED front lights with light guide. Dynamism and emotion are present as ever in the genes of the 308, particularly with its more assertive look thanks to new Xenon headlamps with titanium coloured mask and the hatchback in its exclusive GTi finish.
Determined to consolidate its leadership in terms of road holding and driving pleasure, the Peugeot 308 seeks to become a reference in terms of environmental efficiency. Indeed, following in the footsteps of the 508, the new Peugeot 308 features innovative e-HDi micro-hybrid technology, the latest generation STOP & START, on the 1.6 litre HDi FAP 112 bhp Euro 5 engine. This offer, on the "entry level" engine, is available with a semi-automatic manual gearbox and, for the first time, with a full manual gearbox, for optimal driveability.

A FLUID AND LUXURIOUS INTERIOR
Stylists worked hard to exploit to the full the interior volumes freed up by the semi-tall architecture of the Peugeot 308. They therefore designed a particularly inclined fascia panel, almost symmetrical to the front windscreen pillars, to offer unimpeded exterior visibility.
In addition, there was a marked determination to give the interior a very upmarket feel and an enhanced sense of perceived quality. The result is a fluid, pure and elegant fascia panel where pride of place is given to superior materials, according to finish: soft covering, leather trim, chrome, black lacquered materials… The care given to the finish and the emphasis on interior comfort are evident in every detail. According to the level in the range, new motifs decorate the door panel strips, panel trim, thumb rests on the steering wheel, etc. Similarly, the special seats on the GTi version have red visible stitching with specific marking on top of the seat back and an aluminium steering wheel ring showing the word “GTi”. Dark-tinted rear windows combined with dark wheel trims (Storm Grey) and the titanium mask of the discharge lamps, give this version a sporty and assertive identity, perfectly in keeping with the dynamic potential of its 1.6 litre THP 200 bhp engine.
Inside the 308 CC, the eye is caught also by the elegance of the 4 seats with integral head restraints and the possibility of full leather trim on the fascia panel, in different shades, which convey a touring car image. This distinctive design makes for even more comfortable seats with an Airwave warm air diffuser behind the necks of the front passengers. The pleasure of open-top driving is thus enhanced.

ELEGANT LINES ENHANCED BY ADVANCED TECHNOLOGY
The design of the new Peugeot 308 subtly incorporates the new stylistic codes of the Peugeot Marque. While the dimensions are unchanged, the new lines marry as closely as possible the cars mechanical assembly to accentuate its athletic poise, while the front aspect gives a fresh look to the "floating" front grille concept. Greater importance accorded to unbroken surfaces marks a determination to present an elegant and luxurious style. The central protective capping, available in a black lacquer finish, has been made thinner to give greater prominence to the sheer metal. This is also true of the single air intake which is now smaller in size.
Styling elements enhance the natural elegance which emanates from the new 308. A satin chrome bead enhances the new front grille, as do horizontal bars, available in lustrous black or chrome according to body shape (saloon, CC or SW).
The bottom section of the lower front panel, which helps visually to broaden the car and "plant" it on the road, incorporates new dual-function lights (daytime and sidelights) shaped like a boomerang, available according to versions. With their meticulous finish, they blend perfectly and are harmoniously positioned on the upper surround of the fog light housing. Composed of variable intensity LEDs and a light guide, they guarantee a unique visual signature by day and by night while illustrating the high level of technology featured on the new 308.
In the upper section, the V-shaped nose of the bonnet is one of the main expressive features of the Peugeot 308. It has been redesigned to fit the cars mechanical assembly as closely as possible and provides a new link with the floating front grille, in line with Peugeots new stylistic codes. The Marque badge, in its new dual material construction, is proudly positioned at the tip of the bonnet on a new black lacquer base set with a chrome bead, also in the shape of a V.
The outline of this nose, fluid and characteristic, is more curvaceous, particularly at the junction of the lights and the bonnet. The new smooth glass front headlamps, closely fitting the three cylinders, suggest a look that is both refined and assertive. And when the 308 is equipped with dynamic bi-directional Xenon headlamps complete with titanium coloured base, this look becomes even more profound, displaying all the strength of character of the new 308.

The 2012 Peugeot 308 seeks to become a reference in terms of environmental efficiency. Indeed, following in the footsteps of the 508, the new Peugeot 308 features innovative e-HDi micro-hybrid technology, the latest generation STOP & START, on the 1.6 litre HDi FAP 112 bhp Euro 5 engine. This offer, on the "entry level" engine, is available with a semi-automatic manual gearbox and, for the first time, with a full manual gearbox, for optimal driveability.
At launch four petrol and four diesel engines will be available.
4 Euro 5 petrol engines:
4 Euro 5 petrol engines:
- 1.4 litre VTi 98 bhp with 5-speed manual gearbox;
- 1.6 litre VTi 120 bhp with 5-speed manual gearbox or automatic gearbox;
- 1.6 litre THP 156 bhp with 6-speed manual gearbox or automatic gearbox;
- 1.6 litre THP 200 bhp with 6-speed manual gearbox (exclusive to GTi version).
4 Euro 5 diesel engines:
- 1.6 litre HDi FAP 92 bhp with 5-speed manual gearbox;
- 1.6 litre e-HDi FAP 112 bhp with 6-speed manual gearbox or electronically-controlled manual gearbox;
- 2.0 litre HDi FAP 150 bhp with 6-speed manual gearbox;
- 2.0 litre HDi FAP 163 bhp with automatic gearbox or 6-speed manual gearbox (only on the 308 CC).

HIGH LEVEL SAFETY ON AL CO UNTS
Whether in terms of primary, secondary or tertiary safety, the new 308 is positioned at the highest level.
Firstly, the excellent rigidity of the structure ensures optimal operation of the wheels and suspension ensuring a high level of primary safety. In terms of secondary safety, the structure itself has been rigorously designed to withstand even the most severe impact, thanks in particular to a triple force channel at the front. The use of high-strength steel and "multilayer" reinforcements in specific areas has made it possible to raise the level of safety of occupants while reducing the overall weight of the car. In addition to the performance of the structure, efficient means of restraint are proposed:
- up to 8 air bags on the saloon and SW;
- up to 6 air bags on the CC, including 2 head air bags at the front;
- extractible safety hoops on the CC in the event of rollover;
- 3-point seat belts with belt not fastened or unfastened acoustic warnings;
- Isofix fixtures.

Tuesday, October 29, 2013
Rear boot lights Peugeot 308 Volkswagen polo gti
As usual im a sucker for lights .. so i decided to light up the rear boot as i felt the original OEM lighting was certainly not bright enough for my liking. Hence went for a hunt and got 2 strips of amber LED similar to the ones i use for the footwell. This are pretty easy to wire hence you can just go around the boot perimeter ... the hardest task is only opening up the original light casing .. some pictures to light up the day:
| Peugeot 308: new LED addition on the right ... during day time |
| What you see at night .. |
| Did the same for the Polo .. on the left this time |
| What you see at night |
Subscribe to:
Posts (Atom)

